Shanghai Qi Pang Industrial Co., Ltd.

High Efficiency Traverse Drive Machine with Adjusting Lamination Stages

Product Details:
Place of Origin: Shanghai
Brand Name: qipang
Certification: SGS
Model Number: RG3-20-2MCRFX
Payment & Shipping Terms:
Minimum Order Quantity: MOQ≥1
Price: Negotiable
Packaging Details: Carton, wooden box
Delivery Time: 1-3 working day
Payment Terms: T/T, Western Union, L/C
Supply Ability: 500 PC per day
  • Detail Information
  • Product Description

Detail Information

Name: Linear Traverse Brand: Uhing
Material: Aluminum Alloy Weight: 7.5 Kg
Suit: Steel Wire And So On Model: RG3-20-2MCRFX
Voltage: 220V Axial Thrust: 160 N
Linear Pitch: 20 Mm Support: Support Custom-made
High Light:

rolling ring traverse drive

,

traverse drive machine

Product Description

Qipang Rolling ring drive traves unite RG3-20-2MCRFX with roller Rollring Traverse Unit

 

 

Shanghai Qi Pang Industrial Co., LTD has been working on the supply of Rolling Ring Drive equipment since 2008. During this time, the company supplied supplies to many cable, textile and construction companies located in most European countries, Southeast Asian countries, the Americas and northern African countries.

 

Model type Linear Pitch mm/r Thrust N Weight Kg
GP3-15 11 110 0.9
GP3-20 16 160 1.6
GP3-22 16 160 2
GP3-25 25 260 3
GP3-30 25 260 2.7
GP3-40 32 420 11.2
GP3-50 40 700 33
GP3-60 48 1000 42

 

Model type Linear Pitch mm/r Trust N Weight Kg
GP4-15 11 220 1.5
GP4-20 16 320 3
GP4-30 25 520 3.7
GP4-40 32 840 13
GP4-50 40 1400 38
GP4-60 48 2000 45

 

Model GP15 GP20 GP30 GP40 GP50 GP60
A*B*C ( mm ) 92*52*66 111*68*85 135*85*105 160*101*129 184*119*149 220*132*160
D   215 215 240 360 360
E   30-60 30-60 32-77 37-77 37-77
F   25 25 32 38 38
G 14 14 14 17 25 25
H 38 40 42 50 60 60
I 16 18 20 22 28 28
J 24 35 55 60 70 70
K 48 60 70 85 96 101
M   50 50 65 65 65
S 40 70 70 76 100 100
N 32 40 60 70 80 80
4-M 4-M6 4-M6 4-M6 4-M12 4-M12 4-M12
Thrust N 100 135 265 420 700 1000
Weight KG 1.2 2.5 8.5 11.2 33 42
Moving intercept 0.1-11 0.1-16 0.1-25 0.5-32 1-40 1.5-48

 

Product display​

 

High Efficiency Traverse Drive Machine with Adjusting Lamination Stages 0

High Efficiency Traverse Drive Machine with Adjusting Lamination Stages 1High Efficiency Traverse Drive Machine with Adjusting Lamination Stages 2

 
Installation instruction
It is important to prepare the polished shaft, the guide bar, the end stop lead screw, the endstops, etc. acc
 
 
ording to the installation dimensions of relative types and the technical requirementsof equipment, as the figure shows.

Polished Shaft Surface hardness: HRC50- -60; Tolerance on diameter: h6; True runningtolerance: <0. 1mm/m; Length: not larger than 20- 30 times of the diameter of the shaft; Leadingend chamfer: 2x 30°.
 
Ratio of take-up reel and the shaft in general, the shaft speed should be smaller than thetake- -up reel speed so that the shaft and traverse drive lives could be increased. It isrecommended that the rotation ratio of the shaft over the take-up reel be 1:1-1:5, with lower ratiofor thicker wires and higher ratio for thinner wires, and the scale indication not being less than 1.
 
Direction of Shaft Rotation the rotation direction of the shaft transmitted by the take- -up reelmay be either positive or negative, however, there is difference regarding the installation positionsof the reversal arm, or otherwise the direction could not be switched. When facing the scale dial,downward rotation is defined as positive. The reversal may be realized only when the trigger rolleris installed backward. The shaft rotation is presetted and installed as in positive direction at thefactory.

Get in touch with us

Enter Your Message

You Might Be Into These