|Place of Origin:||China|
Payment & Shipping Terms:
|Minimum Order Quantity:||MOQ≥1PC|
|Packaging Details:||Wooden bag|
|Delivery Time:||1-5 working day|
|Type:||Type C||Weight:||6-7 Kg|
|Linear Pitch:||1~15 Mm||Axial Thrust:||15 Kg|
|Surface Hardness:||HRC° 50-60||Material:||Aluminum Shell|
rollring traverse unit,
ring traverse drive
Hight Quality GP20 Rolling Ring Drive for High speed bow machine
Product Brief Introduction
Our company produces a wide range of Smooth Shaft (Rolling Rings) Traverse Drives with different types, which can meet various requirements of our customers. Among our products, the types PX15-PX30, with housings of Aluminum alloy, have 3-frame and 4-frame models respectively, the thrust force of the 4-frame model doubling that of the 3-frame one. GP40 and GP50 have two models, one with the Aluminum alloy housing and the other with the cast iron one. And PX60 is the cast iron housing. The housing made of cast iron have good rigidity and reliable positioning, being applicable to the applications which are under the severe environmental conditions and require large thrust force.
The Smooth Shaft (Rolling rings) Traverse Drives manufactured by us are characterized with a lot of features such as the Step-less speed adjustment, the Instantaneous reversal, the Drive position adjustment just by means of the release lever, the Special treatment of the Smooth Shaft, the Traverse Drive being mounted with selected high performance bearings, and long service life.
We are committed to perfect after-sales services, timely supply fitting parts, and user support by eliminating their troubles.
|The Parameter List
(Rolling Ring Drives)
|Model No:||Linear Pitch
1 Release Lever , There are two positions, i.e. the working position 1 and the r “ ” eleasing position “0”. When the lever sits at the working position, the bearings above it are at the lifting position and apply pressure to the Smooth Shaft and so make the Traverse Drive generate the thrust force. When the lever sits at the Releasing position, the bearings above it are at the falling position and by pushing with hands you can make the Traverse Drive slide freely on the Smooth Shaft. Before install the Smooth Shaft, pull the Release Lever and check if the bearings can be moved up and down.
2 Mounting the Smooth Shaft , By putting the Release Lever at the released position “0”and adjusting the sheathes at the both sides of the Traverse Drive you can install the Shaft into the Traverse Drive, and then pull the Release Lever to the Working position”1”.
3 Rotation Speed of Shaft , The take-up bobbin speed shall be higher than the shaft speed of the traverse drive. The speed ratio available ranges from 5:1 to 1:1. If the wire size is small the ratio will be large and if the wire size is large the ratio will be small.
4 Pitch Adjustment , The scale values 1-10 on the dial are the adjustment range of pitches,and not the numeric value of pitch. The pitch is matched to the thickness of the wire/cable. When the Indicator is at the left of the Scale Dial, the Traverse Drive dwells on the shaftwithout any movement. In addition, the adjustment should not be made to the maximum pitch position. When adjustment is made the Indicator shall be disengaged completely from the Serrated Scale Dial.
5 Mounting the Wire Guide Pulley/Roller , When mounting the wire part special care should be taken not to turn the screw too deeply into the box, in order to avoid influence the normal working conditions of the internal mechanism.
6 Traverse dravel , Adjust the positions of two reversal end stops on the lead screw to make the travel match the position and length of the take-up bobbin.Main technical parameters of standard Rolling Ring Drives.