|Place of Origin:||China|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 unit|
|Delivery Time:||10 working day|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||300 units per month|
|Name:||Automatic NZ-2 Type Steel Wire Rope Wiring Rewinding Machine||Other Name:||NZ-2 Type Wiring Rewinding Machine Manual Use|
|Keywords:||Wiring Rewinding Machine||Model:||NZ-2|
|Condition:||New||Wire Material:||Steel Wire Rope|
fully automatic bar bending machine,
bobbin coil winding machine
Automatic NZ-2 type steel wire rope wiring rewinding machine manual use
Automatic NZ-2 type steel wire rope wiring rewinding machine
This series of hand-cranked automatic wiring machine adopts hand-cranked gear transmission, pointer or electronic counting, and mechanically controls the automatic wiring. It can be used to wind a variety of small coils with a small number of turns and automatic winding.
Applicable cable diameter: 0.06-0.60mm
Row coil diameter: 12-150mm
Row coil width: 6-110mm
Counting range: 0-2499 laps
Transmission speed ratio: fast 1: 6 (wire diameter 0.06mm-0.3mm); Slow 1: 1.5 (wire diameter 0.3mm-0.6mm) two gears.
The machine is factory set to slow.
Pay-off frame shaft diameter 10mm
Bobbin width 85mm
Pay-off reel diameter 130mm
Take-up shaft diameter 10mm
Volume: 510 * 340 * 330
This product is packed in a carton box of 20KG,
packing size: 510 * 340 * 330mm
Uses: This machine is suitable for all kinds of coils that need to be aligned in the flat winding such as low-voltage transformers, automobile ignition coils, wire-wound resistors, and meter parts in the telecommunications and electrical industries.
Mechanical principle and method of use: This machine can be used with both hand-cranked and electric motors. The host and the thick wire tensioning device should be separated by 300mm from each other, which is conducive to thick wire winding. Line the thick wire with the 35 tooth gear on the hand wheel shaft and rotate the middle 69 tooth gear to the head gear 23 tooth gear. The specific speed of the hand wheel disc and the head shaft is 1: 1.5, and the line range is 20 # -30 #. Wire the thin wire, rotate the middle 35 tooth gear with the 69 tooth gear on the hand wheel shaft, and then transfer it to the 23 tooth gear on the front axle. The specific speed of the hand wheel disc and the front is about 1: 6, and the line range is 30 # -40 #.
The small friction disc on the hand wheel shaft uses a rubber wheel to vertically drive the large Mocha disc to drive the long lead screw to rotate. The rubber wheel is a variable speed mechanism of the machine. Twist the long screw knob to displace the rubber wheel and cause the slider to change speed. When changing the wire number, twist the knob to adjust the density of the wire.
Note that when moving the position of the rubber wheel, the hand wheel must be turned, so that the rubber wheel is not damaged, the rubber part cannot be refueled and kept clean, otherwise it will affect the wiring. On the coils of the shaft. The coil drive pulls the wire, drags the pendulum block, and the bobbin can be put freely. Once the wire is interrupted, the brake disc is stopped by the force of the tension spring, so that the bobbin can continue to put the wire without inertia. The reciprocating carriage moves back and forth with the rotation of the long screw, and its stroke is the coil length controlled by the positioning circle.
Performance: coil diameter 12-150 mm, coil length 6-110 mm. Applicable wire number SWG 20 # -40 # can count 2500 turns.
Our company mainly products roller guides ,rolling ring drives ,wiring rewinding machine, wire coil winding machine ,automatic coiling and packaging machine, microcomputer automatic rolled plate machine ,wire straightener , wire straightening and cutting machine, etc. (Some as follow picture show)
After the sale, the machine is guaranteed for one year under the premise of reasonable use of the customer. Maintain work at home and maintain response time of no more than 24 hours. Free maintenance during the warranty period, and the equipment maintenance service beyond the warranty period is subject to clear charges.
The company has developed from the production of a single rolling ring drive, wire roller device to large cable winder, coil winding machine, small spool winding machine, wiring rewinding machine, textile yarn winding machine, microcomputer coil winding packaging machine, wire straightening machine, wire straightening and cutting machine, etc. The series is equipped with advanced production equipment, and the company has become a well-known professional equipment manufacturer in the industry.
Q: What are your payment terms?
A:100%TT or prepaid 50% , balance 50% before shipping.
Q: How can I get my order? How can I know you sent the goods?
A:We will send the goods by UPS, DHL, FedEx or sea shipment. After we sent the goods, we will give you the tracking number or other relative files for checking.
Q: How long is the warranty period?
A:12 months warranty, we will send you free spare parts by air within one week if there are any quality problems.
Q:What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q:What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q:Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery