Qipang 630mm/800mm wire coil winding machine cable reel unwinding machine from Shanghai TC630 TC800
4.The size about the bobbin:>500mm
5.tolerance weight: 1000kg
6.Optional part:Meter coun ter,Reduction drive,A tension device that adjust speed
1. 630-1000mm active pay-off machine
Adapt to bobbin flange OD diameter: 630-1000mm, 1000mm, overall width 475-750mm, inner hole 56/80
Top shaft mode: no shaft top cone pneumatic top tight
Pay-off speed: MAX200 m / min
Clamp the bobbin: 0.75KW electric screw lift
Power: 4KW motor drive spool release line
Brake: 10KG electromagnetic brake
Maximum load capacity: 3000 kg
2. Vertical tension storage Accumulator/Dancer
Total height of 2 meters;
The storage line volume is 0-15 meters, and the storage line wheel is 400mm (4 groups + 3 groups);
Adapt to the wire diameter: 0.5-10mm2 hard wire, 15mm soft wire;
Guide wheel material: aluminum alloy material, surface hardening treatment;
Control mode: The sensor gives a 0-10V voltage signal to control the speed of the line.
3. Meter counter
Form: one-way stop;
The surface of the meter wheel and the pressure roller adopts a rubber wheel to ensure that the wire is not damaged.
4. 400-630 shaftless winding machine
Adapted to bobbin flange OD diameter: PN400-PN630, coil width 280-475mm, inner hole diameter 56mm
Applicable line speed: 200m/min
Top shaft mode: no shaft top cone
Clamp the bobbin: electric screw lifts, the upper and lower limits are safe and reliable
Cable: GP30 rolling ring drives, adjustable pitch. Wire winding : 10N.M torque motor winding wire
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
If you have any questions,please be free to contact with us.Thank you!Whatsapp/Wechat/Skype:+86 13472640466